My equipment

Variac

This is a 10 A variac.

Thandar TG-102

Function generator. Frequency adjustable between 0,02 Hz and 2 MHz. Genererates sine, square and triangle waves with an adjustable DC offset. Output level adjustable between 1 and 20 Vpp. The previous owner probably was a heavy smoker, because the exposed parts of the front are all yellow but the parts that are normally covered are still white!

Kenwood PD35-10D

Regulated DC Power supply, 0-35 V and 0-10 A.

Philips PM3200

0-10 MHz oscilloscope. Used to have a small problem with its V/div adjustment but that was fixed after thouroughly cleaning the V/div selection switch.

Fluke 8000A

Bench multimeter, can measure voltages up to 1200 V and currents up to 2 A.

Cheap digital DMM’s

Two cheap, digital multimeters I don’t use a lot. Both of them only work partially. On both of them I used a black marker to hide the defective functions.

Soldering station

48 W, adjustable from 160 to 480 degrees centigrade (altough I use 320 degrees for most soldering jobs).

Music

I have a Erres (= Philips) SX6691 tuner/amplifier I most often use to play music from my computer. It is also connected to a Philips F7112 turntable.